5 Tips for Installing Engineered Hardwood Flooring 

Engineered hardwood flooring is a popular choice among homeowners for its durability, elegance, and ease of installation. It is made up of multiple layers of wood, with a top layer of solid hardwood, making it more stable and resistant to moisture and temperature changes compared to solid hardwood.  

5 Tips for Installing Engineered Hardwood Flooring 

If you’re planning to install engineered hardwood flooring in your home, here are five tips that can help you ensure a successful installation of the quality engineered hardwood flooring Peterborough. 

Prepare the Subfloor:  

The subfloor is the foundation on which your engineered hardwood flooring will be installed. It is crucial to prepare the subfloor properly to ensure a smooth installation process. Make sure the subfloor is clean, dry, and level. Use a level to check for any uneven areas, and sand or fill them as needed. If the subfloor is concrete, it may be necessary to install a moisture barrier to prevent moisture from seeping through and damaging the flooring. 

Acclimate the Flooring:  

Engineered hardwood flooring needs to acclimate to the environment of your home before installation. Leave the flooring in the room where it will be installed for at least 48-72 hours prior to installation. This will allow the flooring to adjust to the temperature and humidity levels of the room, minimizing the risk of expansion or contraction after installation. 

Plan the Layout:  

Before starting the installation, plan the layout of the flooring. Determine the direction in which the planks will be laid, usually parallel to the longest wall or the main light source. Also, measure the room and calculate the number of planks needed. It is recommended to order 10-15% extra flooring to account for cuts and waste. Arrange the planks in a way that the end joints are staggered, avoiding a ‘stair-step’ or ‘H’ pattern. 

Use the Right Tools and Adhesive:  

Make sure you have all the necessary tools and adhesive before starting the installation. Common tools required for installation include a tape measure, pencil, saw, hammer, and a flooring stapler. Use an adhesive that is specifically designed for engineered hardwood flooring and follow the manufacturer’s instructions carefully. 

Leave Expansion Gaps:  

Wood naturally expands and contracts with changes in temperature and humidity. Therefore, it is important to leave an expansion gap around the perimeter of the room, usually about 1/4 to 1/2 inch, to allow for this movement. Use spacers to maintain the expansion gap during installation and remove them once the installation is complete. 

Conclusion: 5 Tips for Installing Engineered Hardwood Flooring  

Remember to follow the manufacturer’s installation instructions carefully, as there may be specific requirements for your flooring. Additionally, it is always a good idea to consult a professional if you are unsure about any part of the installation process. With proper preparation and attention to detail, installing engineered hardwood flooring can be a rewarding DIY project that enhances the beauty and value of your home. 


Leave a Reply

Your email address will not be published.